Circles and Ovals
Preventing Earing and Orange Peel in Deep-Drawn Aluminium Circles and Oval Blanks
Metallurgical grain control and alloy selection (1050, 1060, 1070, 1100, 3003, 5052) for cookware pressing, multi-stage spinning, lighting reflectors, and custom A/B axis oval blanks.
Deep drawing and metal spinning of pots, pans, pressure cookers, and lamp reflectors require fine, isotropic grain structure and consistent anneal temper. In our Aluminium Circles and Ovals line (0.3–6.0 mm thickness, Ø80–1,600 mm diameter), every blanking batch is checked for edge burr, flatness, and surface quality.
Matching Alloy and Temper to Forming Severity
- 1050 / 1060 / 1070 (O / H12 / H14): High thermal conductivity and ductility for general cookware bodies, pizza pans, and spun lighting shades.
- 1100-O: Preferred for severe multi-stage deep drawing where smooth side-walls and low earing are critical.
- 3003-O / H14: Manganese-strengthened alloy providing higher dent resistance after pressing and during commercial kitchen service.
- Oval Blanks (A / B Axes per Drawing): Cut to your approved A and B axes drawing in 1050, 1060, 1100, 3003, or 5052; tool geometry is confirmed prior to blanking.